Otu

UCT315-48

Usoro nke UC na-ezo aka na ahaziri ahazi, ejiri ọtụtụ ebe Ohiri isi ngọngọ nkeji bọọlụ nwere aka nkwụnye aka. N'ime isi ha bụ bọọlụ nwere oghere dị omimi nke nwere a dayameta mpụta okirikiri (SPB) emebere ka ọ dabara n'ime oghere okirikiri dabara adaba nke ụlọ nkedo. Na-akwado metric akụkụ, A na-ahazi usoro isiokwu a maka ngwa mmepụta ihe na-achọ ikike ibu dị elu, nrụnye kwụ ọtọ, na arụmọrụ a pụrụ ịdabere na ya.

Nyefee arịrịọ

Ọnụ ego nke UC Series

ISO	UCT315-48
Nrụpụta Mba.	UC315-48
Ebe obibi	T315
Obere dayameta	d	3 in
Ogologo oghere mgbakwunye	o	1-13/32 n'arọ
Ọgwụgwụ mgbakwunye ogologo	g	1-1/16 nke
Elu nke mgbakwunye njedebe	p	5-3/16 nke
Elu nke oghere mgbakwunye	q	3-17/32 nke
Dayameta nke mgbakwunye bolt oghere	s	1-13/16 nke
Ogologo uzo piloting	b	5-29/32 n'arọ
Obosara uzo piloting	k	1.024 n'arọ
Ịgba elu	e	7-9/16 nke
N'ozuzu elu	a	8-1/2 n'arọ
N'ozuzu ogologo	w	10-5/16 nke anụ ọhịa
N'ozuzu obosara	j	3-17/32 nke
Obosara oghere	l	2-5/32 nke anụ ọhịa
Ebe dị anya site na njedebe ihu ruo na ahịrị etiti nke dayameta oche okirikiri	h	6-5/16 nke
Obosara mgbanaka ime	B	3.2283 n'arọ
Center of Bearing from End	n	1.26 n'arọ
Ibu ibu	12.7 n'arọ

Ọdịdị nke UC Series Bearings

Otu ihe na-ebu UC na-ahụkarị nwere isi ihe ndị a:

Ebe obibi Ohiri isi:A na-ejikarị ígwè ntụ ntụ ma ọ bụ ígwè ductile eme ya (dịka ọmụmaatụ, UC-P suffix), na-egosipụta oghere mgbago (plummer block base, nwere oghere bolt ma ọ bụ oghere apịaji), na-enye nkwado siri ike na nkwụsi ike.
Mpụta Bọọlụ Dị Mpụta Spherical Deep Groove:Ihe nrịba ahụ nwere mgbanaka dị n'ime emebere ka ọ daba n'elu ọkọlọtọ cylindrical ọkọlọtọ (dịka, ndidi h7). Mgbanaka elu ya nwere atụmatụ a okirikiri elu elu nke na-anọdụ n'ime oghere okirikiri nke ụlọ ahụ.
Nhazi mmechi:Ejiri akara n'akụkụ abụọ (na-abụkarị rọba dị ka NBR ma ọ bụ FKM) iji gbochie nbanye nke mmetọ, unyi na mmiri nke ọma ka ị na-ejigide mmanụ dị n'ime.
Ngwaọrụ mkpọchi:N'ụzọ bụ isi na-eji ihe ihe nkwụnye aka uwe (ụdị eccentric ma ọ bụ mwepụ) jikọtara ya na akị mkpọchi na igwe washer. Usoro a pụrụ iche na-enye ohere ka a na-echekwa ihe nkedo ahụ n'osisi ahụ site na iji esemokwu, na-eme ka usoro nrịgo na nkwụsịtụ dị mfe. (Rịbama ama: Ụfọdụ UC dị iche iche na-eji mgbanaka ime ime nke nwere akara aka nke nwere aka na-adaba).

Njirimara ndị dị mkpa nke UC Series Bearings

Ikike Nhazi onwe:Ọkpụkpụ okirikiri dị n'etiti mgbanaka dị n'èzí na oghere ụlọ na-enye ohere ka ebu ya nabata obere aro adịghị mma (nke na-abụkarị ruo ± 3°), na-akwụ ụgwọ maka njehie nrụnye ma ọ bụ ntughari osisi.
Nwụnye na nlekọta dị mfe:Nhazi nke a kpọkọtara nke ọma, jikọtara ya na usoro mkpuchi mkpuchi aka nkwụnye, na-enyere aka oke ngwa ngwa na enweghị ngwaọrụ na-arị elu / na-awụda n'elu osisi cylindrical, na-ebelata oge nkwụsị na ụgwọ ọrụ.
Akara kacha elu:Akara ọkọlọtọ na-enye nchebe dị mma megide gburugburu ebe ọjọọ, na-agbatị ndụ ndụ.
Ike Ibu Ibu siri ike:Ụlọ ihe nkedo siri ike na nkedo bọọlụ miri emi na-enye ezigbo ihe radial ibu ikike na agafeghị oke ikike ibu axial.
Nnukwu ndakọrịta & Mgbanwe:Emepụtara ya na ụkpụrụ ISO metric (IS), na-eme ka ọ dị mfe ngbanwe na ị nweta ngwa ngwa n'ụwa niile.

Ngwa nke UC Series Bearings

N'ihi ịdịte aka ha, ịdị mfe iji, yana arụmọrụ a pụrụ ịdabere na ya, a na-ahụ bearings UC n'ọtụtụ ụlọ ọrụ na ngwa:

Igwe ọrụ ugbo (ndị na-akụ traktọ, ndị na-ewe ihe ubi, ndị na-akụ ihe)
Akụrụngwa na-ebufe (Ndị na-ebufe belt, ihe na-ebufe igwe)
Igwe ikuku na sistemu HVAC (Fans)
Igwe eji eji ihe eji eme ihe
Ngwa ihe owuwu
Ahịrị nhazi nri na ihe ọṅụṅụ
Igwe eji akwa akwa
Ụgbọ ala ụlọ ọrụ General (Moto, igbe igbe, ihe ndọba ụgbọala)

Ịhọrọ UC Series Bearings pụtara ịhọrọ ntụkwasị obi, ọnụ ahịa na-akwụ ụgwọ, na ịrụ ọrụ nke ọma.

Akụkọ gara aga

UCT316

Akụkọ na-abịa

2217

Kpọtụrụ anyị

Ngwaahịa ndị emetụtara

22222 KCW33

Igwe ihe na-agbagharị gburugburu bụ ihe eji arụ ọrụ nke ukwuu emebere ka ọ dị mma n'ọnọdụ ọrụ na-achọsi ike. Ihe na-akọwapụta ya bụ ikike ịhazi onwe ya. Ọ na-akwụ ụgwọ na-akpaghị aka maka nkwụsịtụ n'etiti ogwe na ụlọ, nke kpatara njehie na-ebuli elu, nkwụsịtụ osisi, ma ọ bụ nhazi ntọala (na-emekarị ruo 1.5 ° - 3 °). Nke a…

Gụkwuo 🡥

NJ409

Cylindrical roller bearings bụ ihe na-akpụ akpụ na-akpụ akpụ emeziri ka ọ nabata ibu radial dị elu. Ihe ndị bụ isi ha na-akpụgharịgharị bụ rollers cylindrical na-eme kọntaktị n'ahịrị n'okporo ụzọ agbụrụ. Nhazi a na-eme ka ha dị irè nke ukwuu n'ijikwa ike radial dị ọcha, na-eje ozi dị ka ihe dị mkpa n'ọtụtụ ngwa mmepụta ihe. Tụnyere…

Gụkwuo 🡥

7232 C

Angular Kpọtụrụ bọọlụ Bearings (ACBBs) bụ ihe arụrụ arụ nkenke nke ejiri rụọ ọrụ radial na axial jikọtara ọnụ n'otu oge. N'adịghị ka ọkọlọtọ bọọlụ dị omimi, ha na-etinye akụkụ kọntaktị (nke dị n'etiti 15 ° ruo 40 Celsius), na-enyere ha aka ịkwado ndị agha axial dị ukwuu n'otu ụzọ, na-esonyere ndị agha radial na-agafeghị oke. Nke a…

Gụkwuo 🡥

NA6907

Mpempe akwụkwọ mpịakọta agịga na-eji cylindrical rollers nwere oke ogologo ruo dayameta karịrị 4:1. Jiometry “dị ka agịga” a na-enyere ikike ibu radial pụrụ iche n'ime akụkụ obe dị oke ọnụ, na-enye arụmọrụ oghere dị elu ma e jiri ya tụnyere bọọlụ nha nha nha.

Gụkwuo 🡥

UK210-H2310

The UC series bearings na-ezo aka na ọkọlọtọ, nke a na-ejikarị ohiri isi na-ebu bọmbụ nwere uwe nkwụnye. N'ime isi ha bụ bọọlụ nwere oghere dị omimi nke na-egosipụta dayameta mpụta dị okirikiri (SPB) nke emere ka ọ dabara n'ime oghere okirikiri dabara adaba nke ụlọ nkedo. N'ịdabere na metric akụkụ, usoro isiokwu a bụ…

Gụkwuo 🡥

23122 MBW33

Gụkwuo 🡥

Ngwaahịa

Otu

UCT315-48

Ọnụ ego nke UC Series

Ọdịdị nke UC Series Bearings

Otu ihe na-ebu UC na-ahụkarị nwere isi ihe ndị a:

Njirimara ndị dị mkpa nke UC Series Bearings

Ngwa nke UC Series Bearings

N'ihi ịdịte aka ha, ịdị mfe iji, yana arụmọrụ a pụrụ ịdabere na ya, a na-ahụ bearings UC n'ọtụtụ ụlọ ọrụ na ngwa:

Ịhọrọ UC Series Bearings pụtara ịhọrọ ntụkwasị obi, ọnụ ahịa na-akwụ ụgwọ, na ịrụ ọrụ nke ọma.

Kpọtụrụ anyị

Ngwaahịa ndị emetụtara

22222 KCW33

NJ409

7232 C

NA6907

UK210-H2310

23122 MBW33

Hapụ Ozi Gị